
Architecture and building services in the same project
When architecture and building services are designed at separate tables, conflicts arise on site, at the point when they cost the most. In an integrated studio they are resolved beforehand, on paper. This is how we work, and what it means for anyone opening a store, a hotel or a residence.
The cost of separate projects
The traditional approach is well known: the architect defines the spaces, materials and levels, then the services engineer adapts ducts, pipework and switchboards to a design that has already been finalised. The result is evident on site: suspended ceilings that need to be lowered, grilles that disrupt a ceiling designed to be clean, equipment with no room for maintenance, and changes to be approved when the contractor is already at work. Every late correction is paid for in time, money and final quality.
One table from the first sketch
At IDEM, architects and MEP engineers work on the same project from the concept stage. Ceiling heights, duct routes and the position of units and switchboards are decided together with the layout, the lighting and the materials. The shared BIM model and clash detection bring conflicts to light while correcting them costs a line on a drawing, not a demolition.
What changes, project by project
In a luxury boutique, air diffusers and grilles follow the design of the ceiling and the accent lighting, and the tight timing of an opening leaves no room for variations. In a hotel set in a historic palazzo, the routes of the building services are traced on the map of constraints, often while the hotel stays open. In a private residence the technology has to disappear: climate control, home automation and special systems are integrated into furniture and finishes instead of being added at the end.
A single point of contact until opening day
For disciplines that require dedicated signatures, such as structures, acoustics, fire safety and sustainability, we bring in selected specialists and coordinate them ourselves. The client does not manage ten consultants with ten schedules: they have one point of contact who answers for design, site and handover.
One service at a time, too
The integrated method does not require a full commission. Each service can be entrusted on its own, by phase or as a turnkey path: an MEP design for an architect who already has the concept, works supervision, a survey. The standard stays the same.

Planning a new opening or the refurbishment of a building? Tell us about your project. Get in touch →